🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore

1/4" Double Bead Tambour

Product image 1
1 / 13
+8

1/4" Double Bead Tambour

 

White River Hardwoods · Tambour Collection

1/4″ Double Bead Tambour

Solid Wood · Flexible & Solid Backing · Made in the USA


Fine, closely-spaced double bead profiles in solid hardwood. The 1/4″ slat width creates a dense, intricate texture ideal for detailed accent walls, cabinetry, and furniture applications.

Proudly Made in the USA from Premium North American Hardwoods

Two beads in every quarter inch — a profile that rewards close inspection as much as it commands a room.

Available Options

Size & Species

Size Backing Available Species
12″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
12″W × 96″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 46″L Solid Backing — Does Not Flex Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, Alder

* Cherry and Alder are exclusively available in the 24″W × 46″L Solid Backing format.

Why This Profile

The Profile in Detail

●●

Double Bead Profile

Twin parallel beads create a rich, repeating texture that adds depth without overwhelming a space. The fine 1/4″ width makes this one of the most detailed profiles in the tambour range.

↩

Flexible Backing

Despite the fine profile, the flexible backing allows this panel to wrap curved surfaces and columns cleanly, opening up applications rigid paneling cannot achieve.

🌲

7 Species Available

Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, and Alder — all premium North American hardwoods, sanded and ready for your finish.

📐

Specification Grade

Consistent profile geometry across every panel makes this a favorite with architects and millwork specifiers who need reliable repeatable results.

Technical Specifications

Key Facts

Profile

1/4″ Double Bead

Slat Width

1/4″

Thickness

¼″

Panel Sizes

12×48, 12×96, 24×48, 24×46

Backing

Flexible or Solid (24×46)

Use

Interior Only

Before You Install

Storage, Handling & Acclimation

Acclimate First — Always

On receipt, store flat in a controlled interior environment. Allow 24–48 hours to acclimate before finishing or installing. This stabilizes moisture content and reduces post-install movement. Before you begin, lightly roll and unroll each panel to flex the backing — hold the rolled position for 5+ seconds, then return flat.

Interior Use Only

Tambour panels are not suitable for wet or high-humidity environments including showers, bathrooms, or pools. Always install in a space with standard room temperature and humidity.

Installation

Step by Step

1

Prep the Surface

Wall must be clean, sound, and free of dust, grease, or debris. Apply primer to porous substrates for better adhesion.

2

Dry-Fit First

Always dry-fit before committing adhesive. Install vertically or horizontally — confirm your layout before you spread anything.

3

Apply Adhesive

Use PVA, contact, epoxy, or a quality panel adhesive (e.g., Titebond Fast Grab FRP). Trowel for 80–100% coverage to within ¼″ of edges. With a gun, run beads around the perimeter and horizontal beads every 4–6″.

4

Press & Secure

Apply firm, uniform pressure across the full panel. Use a ¾″ sacrificial board when tapping or hammering. For curved applications, temporary bracing until the glue sets ensures clean contact.

5

Leave Micro-Gaps

Leave a hairline gap between adjacent panels — roughly two stacked business cards — to accommodate natural wood movement over time.

6

Clean Up

Clean any adhesive squeeze-out immediately to avoid residue on slat faces.

Installer Advice

Pro Tips

Pre-Stretch Inward

Before attaching, roll the panel inward to stretch the backing. This makes it more compliant and easier to handle, especially on curved surfaces.

Flex Outward with Intent

Follow up by flexing outward firmly to fully stretch the paper backing. A properly stretched panel lays flatter and adheres more evenly.

No Cabinets Through Tambour

Never mount cabinets or furniture through the panel into the wall. Wood movement can cause buckling and will void the warranty.

Trade Program

13% Trade Discount for Design Professionals

Architects, interior designers, and contractors qualify for White River's trade discount on tambour panels. Volume pricing available for larger orders — contact your rep for a quote.

Apply for Trade Access

Warranty Reminder

Warranty may be voided if panels are installed in high-moisture environments, or if cabinetry or furniture is mounted through the tambour panel into the wall. Always follow adhesive manufacturer's instructions and allow full acclimation prior to installation.

The 1/4″ Double Bead Tambour — fine detail in solid wood, built to bend.


 

White River Hardwoods · Tambour Collection

1/4″ Double Bead Tambour

Solid Wood · Flexible & Solid Backing · Made in the USA


Fine, closely-spaced double bead profiles in solid hardwood. The 1/4″ slat width creates a dense, intricate texture ideal for detailed accent walls, cabinetry, and furniture applications.

Proudly Made in the USA from Premium North American Hardwoods

Two beads in every quarter inch — a profile that rewards close inspection as much as it commands a room.

Available Options

Size & Species

Size Backing Available Species
12″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
12″W × 96″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 46″L Solid Backing — Does Not Flex Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, Alder

* Cherry and Alder are exclusively available in the 24″W × 46″L Solid Backing format.

Why This Profile

The Profile in Detail

●●

Double Bead Profile

Twin parallel beads create a rich, repeating texture that adds depth without overwhelming a space. The fine 1/4″ width makes this one of the most detailed profiles in the tambour range.

↩

Flexible Backing

Despite the fine profile, the flexible backing allows this panel to wrap curved surfaces and columns cleanly, opening up applications rigid paneling cannot achieve.

🌲

7 Species Available

Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, and Alder — all premium North American hardwoods, sanded and ready for your finish.

📐

Specification Grade

Consistent profile geometry across every panel makes this a favorite with architects and millwork specifiers who need reliable repeatable results.

Technical Specifications

Key Facts

Profile

1/4″ Double Bead

Slat Width

1/4″

Thickness

¼″

Panel Sizes

12×48, 12×96, 24×48, 24×46

Backing

Flexible or Solid (24×46)

Use

Interior Only

Before You Install

Storage, Handling & Acclimation

Acclimate First — Always

On receipt, store flat in a controlled interior environment. Allow 24–48 hours to acclimate before finishing or installing. This stabilizes moisture content and reduces post-install movement. Before you begin, lightly roll and unroll each panel to flex the backing — hold the rolled position for 5+ seconds, then return flat.

Interior Use Only

Tambour panels are not suitable for wet or high-humidity environments including showers, bathrooms, or pools. Always install in a space with standard room temperature and humidity.

Installation

Step by Step

1

Prep the Surface

Wall must be clean, sound, and free of dust, grease, or debris. Apply primer to porous substrates for better adhesion.

2

Dry-Fit First

Always dry-fit before committing adhesive. Install vertically or horizontally — confirm your layout before you spread anything.

3

Apply Adhesive

Use PVA, contact, epoxy, or a quality panel adhesive (e.g., Titebond Fast Grab FRP). Trowel for 80–100% coverage to within ¼″ of edges. With a gun, run beads around the perimeter and horizontal beads every 4–6″.

4

Press & Secure

Apply firm, uniform pressure across the full panel. Use a ¾″ sacrificial board when tapping or hammering. For curved applications, temporary bracing until the glue sets ensures clean contact.

5

Leave Micro-Gaps

Leave a hairline gap between adjacent panels — roughly two stacked business cards — to accommodate natural wood movement over time.

6

Clean Up

Clean any adhesive squeeze-out immediately to avoid residue on slat faces.

Installer Advice

Pro Tips

Pre-Stretch Inward

Before attaching, roll the panel inward to stretch the backing. This makes it more compliant and easier to handle, especially on curved surfaces.

Flex Outward with Intent

Follow up by flexing outward firmly to fully stretch the paper backing. A properly stretched panel lays flatter and adheres more evenly.

No Cabinets Through Tambour

Never mount cabinets or furniture through the panel into the wall. Wood movement can cause buckling and will void the warranty.

Trade Program

13% Trade Discount for Design Professionals

Architects, interior designers, and contractors qualify for White River's trade discount on tambour panels. Volume pricing available for larger orders — contact your rep for a quote.

Apply for Trade Access

Warranty Reminder

Warranty may be voided if panels are installed in high-moisture environments, or if cabinetry or furniture is mounted through the tambour panel into the wall. Always follow adhesive manufacturer's instructions and allow full acclimation prior to installation.

The 1/4″ Double Bead Tambour — fine detail in solid wood, built to bend.


Select Size
Select Wood Species
From $56.01

Original: $160.04

-65%
1/4" Double Bead Tambour—

$160.04

$56.01

Description

 

White River Hardwoods · Tambour Collection

1/4″ Double Bead Tambour

Solid Wood · Flexible & Solid Backing · Made in the USA


Fine, closely-spaced double bead profiles in solid hardwood. The 1/4″ slat width creates a dense, intricate texture ideal for detailed accent walls, cabinetry, and furniture applications.

Proudly Made in the USA from Premium North American Hardwoods

Two beads in every quarter inch — a profile that rewards close inspection as much as it commands a room.

Available Options

Size & Species

Size Backing Available Species
12″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
12″W × 96″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 46″L Solid Backing — Does Not Flex Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, Alder

* Cherry and Alder are exclusively available in the 24″W × 46″L Solid Backing format.

Why This Profile

The Profile in Detail

●●

Double Bead Profile

Twin parallel beads create a rich, repeating texture that adds depth without overwhelming a space. The fine 1/4″ width makes this one of the most detailed profiles in the tambour range.

↩

Flexible Backing

Despite the fine profile, the flexible backing allows this panel to wrap curved surfaces and columns cleanly, opening up applications rigid paneling cannot achieve.

🌲

7 Species Available

Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, and Alder — all premium North American hardwoods, sanded and ready for your finish.

📐

Specification Grade

Consistent profile geometry across every panel makes this a favorite with architects and millwork specifiers who need reliable repeatable results.

Technical Specifications

Key Facts

Profile

1/4″ Double Bead

Slat Width

1/4″

Thickness

¼″

Panel Sizes

12×48, 12×96, 24×48, 24×46

Backing

Flexible or Solid (24×46)

Use

Interior Only

Before You Install

Storage, Handling & Acclimation

Acclimate First — Always

On receipt, store flat in a controlled interior environment. Allow 24–48 hours to acclimate before finishing or installing. This stabilizes moisture content and reduces post-install movement. Before you begin, lightly roll and unroll each panel to flex the backing — hold the rolled position for 5+ seconds, then return flat.

Interior Use Only

Tambour panels are not suitable for wet or high-humidity environments including showers, bathrooms, or pools. Always install in a space with standard room temperature and humidity.

Installation

Step by Step

1

Prep the Surface

Wall must be clean, sound, and free of dust, grease, or debris. Apply primer to porous substrates for better adhesion.

2

Dry-Fit First

Always dry-fit before committing adhesive. Install vertically or horizontally — confirm your layout before you spread anything.

3

Apply Adhesive

Use PVA, contact, epoxy, or a quality panel adhesive (e.g., Titebond Fast Grab FRP). Trowel for 80–100% coverage to within ¼″ of edges. With a gun, run beads around the perimeter and horizontal beads every 4–6″.

4

Press & Secure

Apply firm, uniform pressure across the full panel. Use a ¾″ sacrificial board when tapping or hammering. For curved applications, temporary bracing until the glue sets ensures clean contact.

5

Leave Micro-Gaps

Leave a hairline gap between adjacent panels — roughly two stacked business cards — to accommodate natural wood movement over time.

6

Clean Up

Clean any adhesive squeeze-out immediately to avoid residue on slat faces.

Installer Advice

Pro Tips

Pre-Stretch Inward

Before attaching, roll the panel inward to stretch the backing. This makes it more compliant and easier to handle, especially on curved surfaces.

Flex Outward with Intent

Follow up by flexing outward firmly to fully stretch the paper backing. A properly stretched panel lays flatter and adheres more evenly.

No Cabinets Through Tambour

Never mount cabinets or furniture through the panel into the wall. Wood movement can cause buckling and will void the warranty.

Trade Program

13% Trade Discount for Design Professionals

Architects, interior designers, and contractors qualify for White River's trade discount on tambour panels. Volume pricing available for larger orders — contact your rep for a quote.

Apply for Trade Access

Warranty Reminder

Warranty may be voided if panels are installed in high-moisture environments, or if cabinetry or furniture is mounted through the tambour panel into the wall. Always follow adhesive manufacturer's instructions and allow full acclimation prior to installation.

The 1/4″ Double Bead Tambour — fine detail in solid wood, built to bend.


1/4" Double Bead Tambour | White River Hardwoods