🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore

9/32″ Double Bead Tambour - Thick

Product image 1
1 / 14
+9

9/32″ Double Bead Tambour - Thick

White River Hardwoods · Tambour Collection

9/32″ Double Bead Tambour

Thick Profile · Flexible & Solid Backing · Made in the USA

A fine double bead profile at 9/32″ with thick construction — sitting between the 1/4″ and 3/8″ in the range, offering a slightly wider slat with the depth and presence of thick profile construction.

Proudly Made in the USA from Premium North American Hardwoods

A precise step between the finest and mid-range profiles — for specifications that need exactly this proportion.

Available Options

Size & Species

Size Backing Available Species
12″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
12″W × 96″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 46″L Solid Backing — Does Not Flex Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, Alder

* Cherry and Alder are exclusively available in the 24″W × 46″L Solid Backing format.

Why This Profile

The Profile in Detail

●●

9/32″ Double Bead

The 9/32″ width occupies a precise position in the double bead family — finer than the 3/8″ shallow bead, more visible than the 3/16″, with thick profile depth adding physical weight.

↩

Flexible Backing

Available for curved and flat installations, with the thick construction providing satisfying tactile depth on any surface.

🌲

7 Species Available

Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, and Alder — all premium North American hardwoods, sanded and ready to finish.

📐

Precise Specification

Selected when the standard 1/4″ or 3/8″ double bead doesn't match the design intent exactly — this profile fills that gap with precision.

Technical Specifications

Key Facts

Profile

9/32″ Double Bead

Slat Width

9/32″

Profile Type

Thick

Panel Sizes

12×48, 12×96, 24×48, 24×46

Backing

Flexible or Solid (24×46)

Use

Interior Only

Before You Install

Storage, Handling & Acclimation

Acclimate First — Always

On receipt, store flat in a controlled interior environment. Allow 24–48 hours to acclimate before finishing or installing. This stabilizes moisture content and reduces post-install movement. Before you begin, lightly roll and unroll each panel to flex the backing — hold the rolled position for 5+ seconds, then return flat.

Interior Use Only

Tambour panels are not suitable for wet or high-humidity environments including showers, bathrooms, or pools. Always install in a space with standard room temperature and humidity.

Installation

Step by Step

1

Prep the Surface

Wall must be clean, sound, and free of dust, grease, or debris. Apply primer to porous substrates for better adhesion.

2

Dry-Fit First

Always dry-fit before committing adhesive. Install vertically or horizontally — confirm your layout before you spread anything.

3

Apply Adhesive

Use PVA, contact, epoxy, or a quality panel adhesive (e.g., Titebond Fast Grab FRP). Trowel for 80–100% coverage to within ¼″ of edges. With a gun, run beads around the perimeter and horizontal beads every 4–6″.

4

Press & Secure

Apply firm, uniform pressure across the full panel. Use a ¾″ sacrificial board when tapping or hammering. For curved applications, temporary bracing until the glue sets ensures clean contact.

5

Leave Micro-Gaps

Leave a hairline gap between adjacent panels — roughly two stacked business cards — to accommodate natural wood movement over time.

6

Clean Up

Clean any adhesive squeeze-out immediately to avoid residue on slat faces.

Installer Advice

Pro Tips

Pre-Stretch Inward

Before attaching, roll the panel inward to stretch the backing. This makes it more compliant and easier to handle, especially on curved surfaces.

Flex Outward with Intent

Follow up by flexing outward firmly to fully stretch the paper backing. A properly stretched panel lays flatter and adheres more evenly.

No Cabinets Through Tambour

Never mount cabinets or furniture through the panel into the wall. Wood movement can cause buckling and will void the warranty.

Trade Program

13% Trade Discount for Design Professionals

Architects, interior designers, and contractors qualify for White River's trade discount on tambour panels. Volume pricing available for larger orders — contact your rep for a quote.

Apply for Trade Access

Warranty Reminder

Warranty may be voided if panels are installed in high-moisture environments, or if cabinetry or furniture is mounted through the tambour panel into the wall. Always follow adhesive manufacturer's instructions and allow full acclimation prior to installation.

The 9/32″ Double Bead Tambour Thick — precision in solid wood.

White River Hardwoods · Tambour Collection

9/32″ Double Bead Tambour

Thick Profile · Flexible & Solid Backing · Made in the USA

A fine double bead profile at 9/32″ with thick construction — sitting between the 1/4″ and 3/8″ in the range, offering a slightly wider slat with the depth and presence of thick profile construction.

Proudly Made in the USA from Premium North American Hardwoods

A precise step between the finest and mid-range profiles — for specifications that need exactly this proportion.

Available Options

Size & Species

Size Backing Available Species
12″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
12″W × 96″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 46″L Solid Backing — Does Not Flex Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, Alder

* Cherry and Alder are exclusively available in the 24″W × 46″L Solid Backing format.

Why This Profile

The Profile in Detail

●●

9/32″ Double Bead

The 9/32″ width occupies a precise position in the double bead family — finer than the 3/8″ shallow bead, more visible than the 3/16″, with thick profile depth adding physical weight.

↩

Flexible Backing

Available for curved and flat installations, with the thick construction providing satisfying tactile depth on any surface.

🌲

7 Species Available

Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, and Alder — all premium North American hardwoods, sanded and ready to finish.

📐

Precise Specification

Selected when the standard 1/4″ or 3/8″ double bead doesn't match the design intent exactly — this profile fills that gap with precision.

Technical Specifications

Key Facts

Profile

9/32″ Double Bead

Slat Width

9/32″

Profile Type

Thick

Panel Sizes

12×48, 12×96, 24×48, 24×46

Backing

Flexible or Solid (24×46)

Use

Interior Only

Before You Install

Storage, Handling & Acclimation

Acclimate First — Always

On receipt, store flat in a controlled interior environment. Allow 24–48 hours to acclimate before finishing or installing. This stabilizes moisture content and reduces post-install movement. Before you begin, lightly roll and unroll each panel to flex the backing — hold the rolled position for 5+ seconds, then return flat.

Interior Use Only

Tambour panels are not suitable for wet or high-humidity environments including showers, bathrooms, or pools. Always install in a space with standard room temperature and humidity.

Installation

Step by Step

1

Prep the Surface

Wall must be clean, sound, and free of dust, grease, or debris. Apply primer to porous substrates for better adhesion.

2

Dry-Fit First

Always dry-fit before committing adhesive. Install vertically or horizontally — confirm your layout before you spread anything.

3

Apply Adhesive

Use PVA, contact, epoxy, or a quality panel adhesive (e.g., Titebond Fast Grab FRP). Trowel for 80–100% coverage to within ¼″ of edges. With a gun, run beads around the perimeter and horizontal beads every 4–6″.

4

Press & Secure

Apply firm, uniform pressure across the full panel. Use a ¾″ sacrificial board when tapping or hammering. For curved applications, temporary bracing until the glue sets ensures clean contact.

5

Leave Micro-Gaps

Leave a hairline gap between adjacent panels — roughly two stacked business cards — to accommodate natural wood movement over time.

6

Clean Up

Clean any adhesive squeeze-out immediately to avoid residue on slat faces.

Installer Advice

Pro Tips

Pre-Stretch Inward

Before attaching, roll the panel inward to stretch the backing. This makes it more compliant and easier to handle, especially on curved surfaces.

Flex Outward with Intent

Follow up by flexing outward firmly to fully stretch the paper backing. A properly stretched panel lays flatter and adheres more evenly.

No Cabinets Through Tambour

Never mount cabinets or furniture through the panel into the wall. Wood movement can cause buckling and will void the warranty.

Trade Program

13% Trade Discount for Design Professionals

Architects, interior designers, and contractors qualify for White River's trade discount on tambour panels. Volume pricing available for larger orders — contact your rep for a quote.

Apply for Trade Access

Warranty Reminder

Warranty may be voided if panels are installed in high-moisture environments, or if cabinetry or furniture is mounted through the tambour panel into the wall. Always follow adhesive manufacturer's instructions and allow full acclimation prior to installation.

The 9/32″ Double Bead Tambour Thick — precision in solid wood.

Select Size
Select Wood Species
From $46.18

Original: $131.95

-65%
9/32″ Double Bead Tambour - Thick—

$131.95

$46.18

Description

White River Hardwoods · Tambour Collection

9/32″ Double Bead Tambour

Thick Profile · Flexible & Solid Backing · Made in the USA

A fine double bead profile at 9/32″ with thick construction — sitting between the 1/4″ and 3/8″ in the range, offering a slightly wider slat with the depth and presence of thick profile construction.

Proudly Made in the USA from Premium North American Hardwoods

A precise step between the finest and mid-range profiles — for specifications that need exactly this proportion.

Available Options

Size & Species

Size Backing Available Species
12″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
12″W × 96″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 48″L Flexible Red Oak, Paint Grade, Hard Maple, Walnut, White Oak
24″W × 46″L Solid Backing — Does Not Flex Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, Alder

* Cherry and Alder are exclusively available in the 24″W × 46″L Solid Backing format.

Why This Profile

The Profile in Detail

●●

9/32″ Double Bead

The 9/32″ width occupies a precise position in the double bead family — finer than the 3/8″ shallow bead, more visible than the 3/16″, with thick profile depth adding physical weight.

↩

Flexible Backing

Available for curved and flat installations, with the thick construction providing satisfying tactile depth on any surface.

🌲

7 Species Available

Red Oak, Paint Grade, Hard Maple, Walnut, White Oak, Cherry, and Alder — all premium North American hardwoods, sanded and ready to finish.

📐

Precise Specification

Selected when the standard 1/4″ or 3/8″ double bead doesn't match the design intent exactly — this profile fills that gap with precision.

Technical Specifications

Key Facts

Profile

9/32″ Double Bead

Slat Width

9/32″

Profile Type

Thick

Panel Sizes

12×48, 12×96, 24×48, 24×46

Backing

Flexible or Solid (24×46)

Use

Interior Only

Before You Install

Storage, Handling & Acclimation

Acclimate First — Always

On receipt, store flat in a controlled interior environment. Allow 24–48 hours to acclimate before finishing or installing. This stabilizes moisture content and reduces post-install movement. Before you begin, lightly roll and unroll each panel to flex the backing — hold the rolled position for 5+ seconds, then return flat.

Interior Use Only

Tambour panels are not suitable for wet or high-humidity environments including showers, bathrooms, or pools. Always install in a space with standard room temperature and humidity.

Installation

Step by Step

1

Prep the Surface

Wall must be clean, sound, and free of dust, grease, or debris. Apply primer to porous substrates for better adhesion.

2

Dry-Fit First

Always dry-fit before committing adhesive. Install vertically or horizontally — confirm your layout before you spread anything.

3

Apply Adhesive

Use PVA, contact, epoxy, or a quality panel adhesive (e.g., Titebond Fast Grab FRP). Trowel for 80–100% coverage to within ¼″ of edges. With a gun, run beads around the perimeter and horizontal beads every 4–6″.

4

Press & Secure

Apply firm, uniform pressure across the full panel. Use a ¾″ sacrificial board when tapping or hammering. For curved applications, temporary bracing until the glue sets ensures clean contact.

5

Leave Micro-Gaps

Leave a hairline gap between adjacent panels — roughly two stacked business cards — to accommodate natural wood movement over time.

6

Clean Up

Clean any adhesive squeeze-out immediately to avoid residue on slat faces.

Installer Advice

Pro Tips

Pre-Stretch Inward

Before attaching, roll the panel inward to stretch the backing. This makes it more compliant and easier to handle, especially on curved surfaces.

Flex Outward with Intent

Follow up by flexing outward firmly to fully stretch the paper backing. A properly stretched panel lays flatter and adheres more evenly.

No Cabinets Through Tambour

Never mount cabinets or furniture through the panel into the wall. Wood movement can cause buckling and will void the warranty.

Trade Program

13% Trade Discount for Design Professionals

Architects, interior designers, and contractors qualify for White River's trade discount on tambour panels. Volume pricing available for larger orders — contact your rep for a quote.

Apply for Trade Access

Warranty Reminder

Warranty may be voided if panels are installed in high-moisture environments, or if cabinetry or furniture is mounted through the tambour panel into the wall. Always follow adhesive manufacturer's instructions and allow full acclimation prior to installation.

The 9/32″ Double Bead Tambour Thick — precision in solid wood.

9/32″ Double Bead Tambour - Thick | White River Hardwoods