White River Hardwoods ?ú LuxeStone Collection
LuxeStone Falling Leaves
Translucent Natural Stone Veneer ?ú Backlit ?ú Interior & Exterior
Ultra-thin natural stone in warm orange, amber, and gold ƒ?? engineered to transmit light. LuxeStone Falling Leaves transforms any surface into a glowing, luminous display, where the organic beauty of stone and the drama of backlit design meet.
Stone thin enough to carry light ƒ?? the warmth of autumn, illuminated from within.
Available Sizes
Format Options
| Dimensions |
Best For |
Use |
| 94?«ƒ?? L ?? 47?¬ƒ?? W |
Large backlit feature walls, statement facades, commercial installations |
Interior / Exterior |
| 48ƒ?? L ?? 24ƒ?? W |
Backlit accent panels, kitchen backsplashes, fireplace surrounds |
Interior / Exterior |
| 11ƒ?? L ?? 4ƒ?? W |
Sample evaluation, detail fills, small accent applications |
Interior / Exterior |
* All sizes use adhesive installation. The translucent backing requires a properly installed light source behind the panel to achieve the full backlit effect. SKUs: LXFL-9447 ?ú LXFL-4824 ?ú LXFL-1104
Why This Material
The Stone in Detail
ƒ??
Translucent Stone ƒ?? Light Passes Through
LuxeStone Falling Leaves is engineered at just 0.06ƒ?? thick ƒ?? thin enough to allow light to pass through the genuine stone surface. The result is a luminous, glowing effect impossible to replicate with any opaque material.
ƒ?ýƒ?ý
100% Natural Stone Surface
The face is genuine natural stone ƒ?? not composite, not printed film. Warm tones of orange, amber, and gold with organic variation across each panel. Every installation is distinct, shaped by the natural patterning of the stone itself.
ƒ??
Customizable Lighting Effects
Warm white light deepens the amber and gold tones for an inviting, natural glow. Cool light creates a crisp, contemporary contrast. Colored LED sources open up entirely different design possibilities ƒ?? the panel responds differently to every lighting choice.
Ļ
Interior & Exterior Rated
Despite its ultra-thin profile, LuxeStone Falling Leaves is suitable for both indoor and outdoor applications. Lightweight and easy to cut and handle, it installs cleanly without the heavy equipment traditional stone slabs require.
Before You Install
Light Source & Surface Prep
Plan Your Lighting First
The backlit effect depends entirely on a properly placed light source installed behind the panel before it is adhered. Select your light type ƒ?? warm white, cool white, or color ƒ?? and position it for even distribution across the full panel area before committing to installation. Uneven lighting will be visible through the stone. LED strip lighting recessed into the substrate is the most common approach for a clean, professional result.
Clean, Sound, and Dry
The wall or substrate surface must be clean, dry, and free of dust or debris. At 0.06ƒ?? thick, any surface irregularities beneath the panel may telegraph through to the face. A smooth, flat substrate gives the cleanest adhesion and the most even light transmission.
Installation
Step by Step
1
Plan & Install Light Source
Select and position your light source behind the substrate. Test for even light distribution across the intended panel area before proceeding. Adjust placement until the glow is consistent edge to edge.
2
Prepare the Surface
Ensure the substrate is clean, flat, and dry. A smooth surface is especially important for translucent panels ƒ?? any bumps or voids beneath the panel can interrupt light transmission.
3
Cut to Size
Use a sharp utility knife or score-and-snap method to cut panels to your required dimensions. The ultra-thin profile cuts cleanly without power tools.
4
Apply Adhesive
Spread adhesive evenly across the substrate surface. Use a translucent or clear adhesive where possible to avoid dark spots showing through the panel face under backlighting.
5
Press and Align
Set the panel into position and press firmly across the full surface. Check alignment and confirm the panel lays flat ƒ?? air pockets will appear as dark spots when backlit.
6
Test the Effect
Once the adhesive has set, activate your light source and evaluate the result. Minor adjustments to light intensity or color temperature can be made at this stage before final finishing.
Installer Advice
Pro Tips
Use Clear Adhesive
Standard white or grey adhesive can create visible dark patches when the panel is backlit. Use a clear or translucent-curing adhesive to maintain even light transmission across the entire panel face.
Even Light Distribution
Hot spots and dark zones are the most common issue with backlit installations. Use LED strip lighting at consistent spacing and test the distribution thoroughly before the panel goes up ƒ?? correcting it after installation is not practical.
Handle with Care
At 0.06ƒ?? thick, these panels are far more flexible than standard stone ƒ?? handle flat and support the full panel during positioning to avoid cracking. Store flat in a protected environment prior to installation.
Care & Maintenance
Clean LuxeStone Falling Leaves with mild soap and water. Avoid abrasive pads or harsh chemical cleaners that may scratch or cloud the stone surface. For exterior installations, periodic sealing with a quality penetrating stone sealer is recommended. Ensure all electrical components of the backlighting system comply with local codes and are installed by a qualified electrician where required.
LuxeStone Falling Leaves ƒ?? natural stone, made luminous.
